TEC controllers are used for thermoelectric cooling and heating in combination with Peltier elements or resistive heaters. Peltier elements are heat pumps which transfer heat from one side to the other, depending on the direction of the electrical current.
This article describes how heating and cooling is possible with Peltier Controllers.

TEC Controller Product Overview

Heating and Cooling with a Peltier Controller

TEC Peltier ModelThermoelectric cooling (TEC) has become the method of choice for fast and compact temperature control. An electrical current through a so-called Peltier element produces an active heat transport. With one side attached to a heat sink, the "object" side of the thermoelectric element can be cooled or heated in respect to the heat sink. A Peltier controller with bipolar output generates the currents accordingly when aiming for a target temperature. To that end, the Peltier controller must know the object's temperature, thus have a sensor input. Primary criteria for the selection of a Peltier controller are its current and voltage ratings, precision and stability. Other important characteristics of a Peltier controller may be its safety features, ease of use (communication, auto-tuning, bundled software), device size and efficiency. Overall efficiency analysis should not only consider losses in the Peltier controller, but throughout all cooling equipment, including the Peltier element.

Peltier Controller TEC-1089

Thermoelectric (Side) Effects

Thermoelectric coolers are constructed of alternating junctions between n- and p-doted semiconductors. Subjected to electrical current, the desired heat flux will be generated (Peltier effect). However, the Peltier element's capacity to cool is not infinite: the more current the Peltier controller delivers, the more Joule heat is generated all conductors, including the thermoelectric element. This is a parasitic heating effect that will completely cancel out the desired cooling effect above a certain threshold. In practice, this means that a thermoelectric cooler driven near its maximum current rating may hardly cool at all. This has also an impact onto the choice of Peltier controller architecture. To supply a 10 A / 10 V element with, say, 6 A, a low cost PWM-based Peltier controller capable of switching 10 A will provide 0 A for 40% of the time and 10 A for 60%. Besides potentially introducing electronic noise, the Peltier controller is ineffective during 40% of the time and the TEC module is ineffective during 60% of the time. However, if a more advanced TEC controller with DC output is chosen, the Peltier controller is working at its nominal efficiency (85% and more) and the Peltier module is working under optimal conditions.

Heating and Cooling Power Householding

Another reason why a thermoelectric module only possesses a limited cooling power is thermal conductivity: the larger the temperature difference between the cold and the hot side, the greater amount of heat seeks to equilibrate—by thermal conduction through the TEC module. The auxiliary input of a Peltier controller is used to measure the sink side temperature. A good Peltier controller will take it into account and predict heat flux. A hot sink helps when the target object temperature needs to be raised, as less electrical current is required for heating. The efficient Peltier controller will be aware of the asymmetry between the heating and cooling powers currently available and will household accordingly. (The main reason to implement power householding routines into a Peltier controller are not energy conservation concerns, but optimal, more stable performance).

The Meerstetter Peltier Controller

Meerstetter Peltier / TEC controllers are advanced thermoelectric temperature controllers, available at different current ratings as compact single and versatile dual channel models. Each Peltier controller channel is a DC current source with a virtually ripple-free output that will drive a Peltier element under optimal conditions. Every Peltier controller channel features a precision object temperature acquisition input (Pt100, Pt1000, NTC) as well as an auxiliary sink temperature input (NTC). The Peltier controller will use optimal power householding (see above) to heat and cool most efficiently. Auto tuning and configurable temperature stability indication are available, and a convenient software suite allows users to monitor and configure all Peltier controller parameters (such as current values, model parameters and safety limits).

TEC Controllers

Overview
Model
Detailed Data
Output Current
(no PWM, bipolar)
Output Voltage
Output Channels
 
TEC-1092 imageTEC-1091 imageTEC-1089 imageTEC-1090 imageTEC-1122 imageTEC-1123 image
TEC-1092 TEC-1091 TEC-1089-SV TEC-1090-HV TEC-1122-SV TEC-1123-HV
more... more... more... more... more... more...
±0 – 1.2 A ±0 – 4 A ±0 – 10 A ±0 – 16 A 2 x ±0 – 10 A 2 x ±0 – 16 A
0 – 9.6 V 0 – 21 V 0 – 21 V 0 – 30 V 0 – 21 V 0 – 30 V
one two
 
 

TEC Controller Product Overview

 

 

Meerstetter Engineering GmbH

Schulhausgasse 12

CH-3113 Rubigen, Switzerland

+41 31 712 01 01

This email address is being protected from spambots. You need JavaScript enabled to view it.