News

We hereby inform you that from April 15th, 2024 all our LDD-1321 (1.5 A / 14 V) will be delivered as hardware version HW v1.20..

Read here how and why cryoWrite successfully uses TEC Controllers from Meerstetter Engineering in its machines.

We are very pleased to announce the opening of a new sales channel with Meetoptics.com.

We hereby inform you that from March 2024 all LDD-1303 (20 A / 120 V) will be delivered as hardware version HW v1.30.

We hereby inform you, that from now on all LDD-1301 will be delivered as hardware version HW v1.20.

We hereby inform you that we are now offering a new LDD-130x firmware version v1.41.

Now available in our Webshop. The Starter-Kit SKT-1165 v2.2

See our new CW laser diode driver for low-current applications. The LDD-1321

Get our CAN-Bus integration for TEC Controllers and Laser diode drivers

We will provide a new TEC Controller firmware version v5.10 as of May 1st, 2023.

Meerstetter Engineering has adapted its GTCs and specifies some points

We wish you, our valued customers, friends and partners a merry Christmas and a happy new year.

We inform you that from now on all newly delivered LDD-1137 devices have the new Hardware version v1.30 and will be programmed with the updated firmware version v1.31 by default.

We inform you that from now on all newly delivered LDD-130x devices will be programmed with the updated firmware version v1.30 by default.

We celebrated the 32nd anniversary of Meerstetter Engineering.

We inform you that from now on all newly delivered LDD-130x devices will be programmed with the updated firmware version v1.20 by default.

Do you use our devices via a serial terminal application or via a PLC? Try this

May walk by Meerstetter Engineering. A well deserved break!

We are very pleased to announce that you can now order the LDD-1301 in our Webshop.

What new products are available at Meerstetter? Can Meerstetter fulfill my special requests?

The version 3.30 is being replaced by the new and improved version 3.40. We expect that you will not notice any difference.

New employee for Meerstetter Engineering - We are happy to welcome Christophe Klein.

We are very pleased to announce that you can now order the LDD-1303 in our Webshop.

We wish you, our valued customers, friends and partners, a happy and thoughtful advent period, followed by a merry Christmas and a happy new year.

We are very pleased to announce that you can now order the LDD-1137 in our Webshop.

We are changing from delivery date to shipping date.

Our TEC Controllers can autonomously drive the temperature curves of the reactants typical for the polymerase chain reaction.

From 1st December 2021 all newly delivered TEC Controllers will be programmed with the updated firmware version v5.01 by default.

Meerstetter Engineering team treated themselves to an excursion

New employee for Meerstetter Engineering - We are happy to welcome Roland Knubel.

New employee for Meerstetter Engineering - We are happy to welcome Christoph Urich.

New employee for Meerstetter Engineering - We are happy to welcome Adrian Schaller.

For future orders of more than 10 pieces, we recommend that you order now.

New employee for Meerstetter Engineering - We are happy to welcome John Chour.

We are proud to present you our Starter Kit. This is the compact solution for beginners, researches and YOU.

We hereby inform you that the M3 x 6mm screws (M3X6 DIN_7985A-TX, V-B) will be replaced by M3 x 6mm & US UNPLUGGED (material: Inox A2) screws from 01.03.2021.

The version 3.15 is being replaced by the new and improved version v3.30. We expect that you will not notice a difference.

New employee for Meerstetter Engineering - We are happy to welcome Maurizio Böni.

Robert Meerstetter, the founder and previous owner of Meerstetter Engineering GmbH entered his well-earned retirement on the first of January.

We wish you, our valued customers, friends and partners, a happy and thoughtful advent period, followed by a merry Christmas and a happy new year.

We are proud that Meerstetter TEC controllers are widely used for PCR (Polymerase Chain Reaction) apparatus which test for Covid-19

Multifunctional and powerful: >= 3.6 kW, pulsed or CW, >= 60 V output voltage.

We have updated our General Terms & Conditions.

New employee for Meerstetter Engineering - We are happy to welcome Thierry Marro.

Starting from the 1st of August 2020 all TEC Controllers will be delivered with Firmware v5.00, if not specified otherwise in the order.

We are happy to present our newest development, the TCI-1181.

We are happy to present our newest development, the TEC-1161: an ultracompact and versatile TEC Controller with two temperature-regulation channels.

We inform you, that after 23.03.2020 all newly delivered TEC controllers will be delivered with firmware version v4.20 by default.

Our brand-new homepage is online and we invite you to try it out.

Your requirements are at the center of our considerations. Due to repeated requests, we have added two additional displays to our TEC controller range. A large four-line display (DPY-1114) and a very small two-line display (DPY-1115).

ISO 9001:2015 certificate confirms the high quality standards of Meerstetter Engineering GmbH.

We inform you, that after 01.01.2020 all newly delivered TEC controllers will be delivered with firmware version v4.10 by default.

New employee for Meerstetter Engineering - We are happy to welcome Carina Thomann.

We invite you to visit our booth A11 at the LPS Bregenz Austria.

Meerstetter completely owned by Berndorf AG.

We hereby inform you that the TEC-1091, version 1.8 will be replaced by an improved version 3.15.

New employee for Meerstetter Engineering - We are happy to welcome Pascal Voser.

New employee for Meerstetter Engineering - We are happy to welcome Xavier Frei.

Which new products are there from Meerstetter Engineering? Can Meerstetter meet my special requests?

We wish you a Merry Christmas and a successful New Year. Thank you very much for the good and pleasant cooperation last year.

We are happy to inform you briefly about the following news: YourSuggestions for u, Up to 40% lower power dissipation of the TEC controller, Web Shop .MSI Software Packages.  

We are happy to announce the new TEC Service Software version 3.11 and a new User Manual. 

We are happy to announce the new miniature TEC controller and the new TEC Controllers Software version 3.00.

The LTC-1142 is our newest combined laser diode driver with onboard TEC controller and powerful features for measurement applications.

Is your system built with LabVIEW, would you like to integrate a TEC controller? We provide a starter kit to easily implement our TEC controllers into your system.

We are pleased to announce the availability of our new QCL controller with integrated TEC controller by January 2016.

Meerstetter Engineering is offering you multiple options to integrate proven drivers and controllers into your own development.

We present the latest addition to our popular portfolio of Peltier temperature controllers. The miniature TEC-1091 delivers true bipolar ±4 A / ±21 V DC, which are - at only 65x38x14 mm3 - resulting in a power density of >2 W/cm3. In this and many other ways, the TEC-1091 follows the 'no-compromise' approach of the entire line of Meerstetter TEC-Family devices (TEC-1089, TEC-1090, TEC-1122, TEC-1123).

We introduce out-of-the-box support for selected OLED displays. This feature allows easy monitoring of temperature and other device status information without using a host system. We also offer a readily cabled kit, the DPY-1113.

We return from a highly successful mission at the 2013 'Laser World of Photonics' exhibition in Munich, Germany. During four days, Robert Meerstetter, Marc Lüthi and Urban Seger presented our latest generation laser diode drivers and TEC controllers to the international trade specialists. Also, the rack enclosure LTR-1200 was publicly demonstrated for the first time.

We facilitate the stand-alone and specifically the side-by-side operation of our digital laser diode drivers and Peltier controllers. The 19" rack enclosure LTR-1200 is designed to hold up to four LDD- and/or TEC-Family devices, to provide modular power (up to 1440W) and adequate cooling, and to offer extensive communication options. Configured to customer's requirements, the LTR-1200 is a versatile platform for integrated turnkey solutions.

We add scripting capability to its line of TEC-Family Peltier controllers. The extended firmware and instruction set allow for local or remote triggering of sequential lookup table readouts, such as ramps, holds and loops.

We proudly announce the release of both firmware and service software for our successful range of TEC controllers. The software fully supports the new TEC-1123 Peltier controller, that delivers 60% more current than the TEC-1122 dual channel base model. The compact, single-channel TEC-1089 is also supported. Highlights of the latest software are PID controller auto tuning, data logging, temperature stability indication and comprehensive error handling.

We expand our newly developed family of full digital TEC controllers for high-precision OEM temperature control applications by the TEC-1123 model. The third member of the Meerstetter TEC-Family delivers ±16 A / ±19 V.

We present a novel, compact OEM laser diode controller for CW, QCW und pulsed laser applications. The LDD-1121 supplies diodes with up to 15 A / 15 V, and in 1 mA resolution.

We introduce newly developed TEC-1089 and TEC-1122 full digital TEC controllers for high-precision OEM temperature control applications. Their 'no-compromise' design is built from ground up around four core elements: low ripple power supply, high precision temperature detection, intelligent MCU control and comprehensive interfacing/safety features.